Home › RESISTORS ›

Ceramic Wirewound

Vitreous enameled and Cement (Al2O3) coated.

Fixed or Adjustable, Round or Oval types, types with Solder- Screw- or Snap-On Terminals. Resistors with corrugated wire for extra high demands on surge or pulse load.

Tubular Resistors; Vitreous Enamelled
Power Rating 30 - 300W

Vitreous Enamelled resistors having excellent
protection of resistor wires. All Vitreous Enamelled
Resistors meet the IEC 68-2-3 56 days at 40°C and
92% humidity. Ceramic body is made of Steatite
C221 and terminals of FeNi. Terminals are
prepared with lead free solder.		  

 Tubular Resistors; Cement Coated
Power rating 30 - 1000W:

Cement Coated (AlPO4) resistors sutable for high pulse load.
Meet the IEC 68-2-3 21 days at 40°C and 92 % humidity. Ceramic
body is made of Steatite C221 or Corderite C520 and terminals of FeNi. Solder terminals are prepared with lead free solder.  

 

 Adjustable Resistors

All resistor types from 12mm∅ - 30 mm∅ and
55mm∅ types with edge wounded flat wire can
be supplied as adjustable resistors.

 

Oval Resistors

A large range of Oval Resistor Types from 30W
to 800W including types with live terminals
are available.		  

Snubber Resistors, Ceramic wirewound

Ceramic vitreous or cement coated wirewound
snubber resistors are available as normal wound
or low inductance wound in round or oval types. All
types are stable to DC Voltage		  

Power Resistors for PC mounting

From traditional axial leads resistors to relatively
large power resistors with nominal power from
3W to 120W.   		  

Ferrule ended oval resistors

These oval shaped resistors have combined terminals and
mounting brackets. They are constructed for mounting directly
on current rails and other live points in power electronic plants.
Power ratings from 40W to 1000W 		  

 Low Ohm Ceramic Resistor

Compact Wirewound high Power Water cooled Resistors WHB

Compact Water cooled High Power wirewound
resistors.
Power range: 20kW - 100kW
Requires de-ionised cooling water (< 5µS/ cm²)